Ptz Setup; Mobile; Mobile Phone Access - Q-See QSD9004 User Manual

5.2.6.3 PTZ Setup

Picture 5-36

5.2.6.4 Mobile

Picture 5-37

Mobile Phone Access

The DVR is currently compatible with mobile phones running Windows Mobile and Symbian operating
systems on 3G networks.
Before you can access the DVR from a mobile phone you need to setup the Network Configuration on
the DVR. Go to section 5.2.3 Network Setup on page 14 of the product manual for instructions on how to do
this. You also need to go to the Main Menu then Devices then Mobile and enter your user name and
password, and set the Server Port to 18600. This port also needs to be forwarded to the IP address of the
DVR along with the ports from 5.2.3 Network Setup.
Explanation: You can only see one channel at a time when viewing from a mobile phone. The
speed of the display depends on the speed of the internet connection.
When accessing from a mobile phone with Windows Mobile operating system, use the following
procedure:
1. Webcam installation
First you need to install the webcam program that is included on the CD that comes with the DVR by
copying the "QQeye.CAB" file to the mobile phone. You can do this by attaching the mobile phone to a
computer and copying the file from the CD to the memory card on the phone, or by copying the file from the
computer to the phone's memory card through a memory card reader or through a Bluetooth connection.
Pic 1
Enter into [Main menu
select the PTZ channel you want to control and set PTZ
protocol (Pelco-D, Pelco-P), Baud rate (1200, 2400, 4800,
9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check
（None, Odd, Even Mark Space）and address code
respectively. Please note the above-mentioned channel
settings must match the settings of the PTZ camera.
Click [Main menu Device Mobile] to enter into [Mobile]
menu.
User Name: indicate user name of DVR.
User password: indicate user password of DVR
Server port: Mobile monitoring port. Setting range is between
1024 and 65535. Please note that
Explanation: Please connect DVR to Internet before
setting DVR port number and the server port no is not equal to
network menus.
Pic 2
20
User Manual
Device PTZ Setup] to
Pic 3