Table of Contents
Advertisement
SETUP MENU
FAV. (Favorite)
CHANNELS
Purpose
Lets you add channels to andremove channelsfromthe ac-
tive
channels found when using the AUTO SEARCH op-
tion. In this way you can customize the channels that are
accessed
through CHANNEL (CH) Up/Down.
FAV. CHANNELS is an
optional
feature. You do not have
to activate this feature in order
to
use your TV.
NOTE: AUX channel
cannot
be removed.
Before Using FAV. CHANNELS
Use the AUTO SEARCH
feature, if not previously used
when you first installed the TV.
To Add a Channel to Scan Sequence
1. FAV. CHANNELS
display should be shown on the
TV if you followed
the "Basic
Menu Operation"
given in the "On-Screen
Menus" section.
f
AUTO SEARCH
- > FAV. CHANNELS
BAND SELECr
AFC MODE
TIME SET
FAV. CHANNELS
CH2
SAVED
PRESS ADJUST
KEY TO CHANGE
Selecting Fav. Channels
Fav. Channels Display
Z. Using CHANNEL (CH) Up/Down go to the nearest
channel ABOVE the channel you wish to add.
3. Press SELECT to go down to the channel you wish
to add.
4.Add
channel
by pressing
ADJUST
(ADJ)
Left/Right
until the display shows SAVED.
5. Press ENTER (ENT) to return to normal TV viewing.
To Remove a Channel from Scan Sequence
1. FAV. CHANNELS
display should be shown on the
TV if you followed
the "Basic
Menu
Operation"
given in the "On-Screen
Menus" section.
2. Using CHANNEL
(CH) Up/Down
go to the channel
you wish to remove.
3. Remove
channel
by pressing
ADJUST
(ADJ)
Left/Right
until the display shows SKIPPED.
4. Press ENTER (ENT) to return to normal TV viewing.
When Some Channels Can Not Be Tuned
If you have some difficulty tuning some channels, you may
have to manually set the BAND SELECT option. If you have
the correct b and, b utarestillhavingdifficulty f indinga chan-
nel
you know to be active, set the AFC MODE to SEARCH.
BAND SELECT
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having ditSculty tuning channels, the BAND SELECI"
may have to be set manually to match your viewing ne.cds.
Before Using BAND SELECT
Connect and turn ON all external equipment, such as cable-
TV decoder, VCR, etc. Before using BAND SELECT, use
AUTO SEARCH if not previously used.
NOTE: BAND SELECT is not displayed while AUX chan-
nel is being used.
To Use BAND SELECT
1. BAND SELECT display should be shown on the TV
if you followed the "Basic Menu Operation" given
in the "On-Screen Menus" section.
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired tuning band, as follows:
AUTO SEARCH
FAV. CHANNELS
-- > BAND SELECT
AFC MODE
TIME SET
.-....qp
BAND SELECT
BROADCAST
PRESS ADJUST
KEY TO CHANGE
s
BROADCAST
is used
for standard over-the-air
broadcasts.
•
Cable
- CATV is used
for
most standard
cable-TV
(CATV) systems.
•
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcastand cable
tuning bands are shown below:.
BROADCAST Band
VHF 2 to 13
UHF 14 to 69*
*
Channels above 69 are not seleetable.
CATV, HRC and ICC Bands
00, 0, 1 to 120"*
** Channels above 120 are not seleetable.
When Some Channels Are Not Clear
If some channels are not clear, change the AFC MODE.
You may have to try different BAND SELECT and AFC
MODE settings until you get a clear picture, channel-to-
channel. Refer to the AFC MODE option for details.
x.
j
Selecting Band Select
2597-0
j
Band Select Display
8--2
Advertisement
Table of Contents
