Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR MODE CHART
1. OUTPUT
TO TV FROM ANTENNA
OUT JACK ON VCR
ANTENNA
OR CABLE.TV
INPUT TO VCR
r
VCR POWER
_
VCR POWER
IS OFF
_"
IS ON
CR POWER
The operating mode of your VCR determines what type of
a program source is provided, and whether the audio is
stereo or monaural. Use this flow chart to determine the
operating
status
of your VCR,
so that you can select
the
proper viewing source and channel on your TV. Select the
VCR output channel (3 or 4) on yourTV to view tapes or to
see programsselected by using the channeltuner in the
VCR.
During tape playback,we recommend you use the AUDIO
and VIDEO outputjacks on yourVCR for improvedper-
formance.
ALL
ANTENNA
OR CABLE-TY
CHANNELS
TO TV
SWITCH IN TV
POSmON
OF TVNCR
SWITCH IN VCR
POSmON
TVNCR switch my
be
mrked
"I'V/VIDEO
on some VCR=.
STEREO
AUDIO
IF TV IS
CAPABLE
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF TV IS
CAPABLE
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON TV
CHAN 3/4
NO
YES
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON TV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MONAURAL
AUDIO
ONLY
(
VCR ANTENNA
OUTPUT TO
vC_OD_
12 - 3
Advertisement
Table of Contents
