Table of Contents
Advertisement
GETTING TO KNOW YOUR REMOTE CONTROL
MODEL SC3820
TV OPERATIONS
The following functions and operations apply to Zenith TV
models built after 1981.
The remote control must be in the TV mode to operate
your"IV. Press MODE to select the TV mode. The TV in-
dicator lights when you are in the TV mode.
!
For optimum performance, point the
remote control toward your TV.
TV Mode Indicator Light
Lights when remote is in TV mode of
operation
MENU, SELECT and ADJUST
Used with the on-screen menus of the TV.
CC (Closed Captions)
Used to access closed captions via
on-screen information displays.
Numbered Buttons
Used to select a TV channeL
ENTER
Used to view the Channdfl'ime Display or to
remove any on-screen menu or display.
SC3820
MODE
Press to select TV mode of operation.
Usedto turnTVOnorOff.
SOURCE
Press to display the menu of TV sour-
ces for TVs having a SOURCE
Menu.
Press SOURCE
again to step through
the source selections. On some TVs,
press SOURCE
to select the AUX
(Auxiliary) channel.
FLASHBK (Flashback)
Used to return to the last TV channel
you were watching.
CHANNEL Up/Down
Used to select a TV channel by going
Up or Down through chanels
programmed in your Fay. (Favorite)
Channels scan sequence.
VOLUME Up/Down
Used to adjust the volume level of
the TV.
MUTE
Used to turn off sound while the pic-
ture remains. Press again to restore
the sound.
TIMER
Used
to activate the SLEEP TIMER.
25_o
3 - 1
Advertisement
Table of Contents
