Table of Contents
Advertisement
REMOTE
CONTROL
MODEL
SC3820
TV AND
VCR
OPERATIONAL
NOTES
Some controls on the remote, like PLAY and VOLUME
will always operate the VCR or the TV. Whether other keys
operate the TV or the VCR depends on the mode of the
remote control. For example, OFF-ON will turn the VCR
ON and OFF while the remote control is in the VCR mode.
It will turn the TV ON or OFF while the remote control is
in the TV mode.
Some of the functions provided by this remote control may
not be part of your TV and/or VCR. You will not be able to
activate those functions even though there is a control but-
ton on the remote. For example, pressing TIMER provides
direct access to the Sleep Timer on many TVs. If your TV
does not have a Sleep Timer, pressing TIMER has no effect.
PREPARATION
FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING
BATI"ERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high
quality, alkaline, size AAA batteries.
1. Remove
the battery
compartment
cover,
PUSH
DOWbl tab and PULL
OUT from top.
2. Insert
new batteries
as indicated
in the diagram
inside
the compartment.
3. Replace
the cover by inserting
the tab on the bottom
of the cover into its housing.
Snap the cover
into
position.
NOTES:
•
Be careful not to place heavy objects on top of the remote
control buttons. Prolonged
accidental
operation
of the
remote control will shorten battery life.
•
If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage
to the remote control.
•
Zenith
is not responsible
for damage
caused by such
battery leakage.
|
1
m
z_-A
6 -- 3
Advertisement
Table of Contents
