Table of Contents
Advertisement
SOURCE MENU
SOURCES
A TV "source" refers to whatever is supplying the TV
with a picture and/or sound. The most common signal
source is your outdoor antenna or Cable-TV system.
When you watch a tape on your
VCR,
the VCR becomes
the signal source.
You can connect more than one signal source to your
Zenith TV at the same time. Hook up an outdoor
antenna, a Cable-TV system, a VCR or another source
like a video disc player or other audio/video component.
Choose the source you want to watch by using the remote
control and the Source Menu.
The Source Menu graphically represents which of the
sources connected to your TV is currently being used.
To Select A Source:
1. Press MENU until the SOURCE menu is displayed.
Note:
The quick way is to press the SOURCE button
on the remote control.
2. With the SOURCE menu displayed, press and
release SELECT until the desired source is
highlighted.
SOURCE MENU
-IANI' E NNA
I
CABLE
A-VVCR
Y-C
3-1
SOURCE SELECTIONS
The actual source selected depends on how the TV is
connected. Selecting ANTENNA will direct to the TV
whatever signal source is connected to the ANTENNA
port of the Jack Pack on the back of the TV (usually the
outdoor antenna). Selecting CABLE will direct the
signal source supplied to the CABLE port of the Jack
Pack (usually the Cable-TV line). Selecting VCR will
access the A-V VCR INPUT port of the Jack Pack
(usually the VCR). The Y/C selection will display the
signal source entering the TV through the Y/C
connection at the back of the TV ( usually used for a
Super-VHS (S-VHS) VCR.
For more detailed information, see the "Connections For
Your TV" section of this Operating Guide.
Advertisement
Table of Contents
