Refrigerator Use - Whirlpool GB9SHDXPQ02 User Instructions

Hide thumbs Also See for GB9SHDXPQ02:
Table of Contents

Advertisement

Available languages

Available languages

REFRIGERATOR U SE
There are two refrigerator compartment doors. The doors can be
opened and closed either separately or together.
There is a vertically-hinged
seal on the left refrigerator door.
When the left side door is opened, the hinged seal
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
IMPORTANT:
The recommended
setting should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream is
firm.
Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended
setting will not cool
the compartments
any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
To Turn Off/On:
Style 1 Press the freezer down arrow touch pad until a
dash (-) appears in both the refrigerator and freezer displays.
Neither compartment
will cool.
Style 2 Turn the freezer control to the word OFR Neither
compartment
will cool when the freezer is set to OFR
A. Hinged seal
The temperature controls are located at the top front of the
refrigerator or freezer compartments.
Temperature Controls
For your convenience, the temperature controls are preset at the
factory. When you first install your refrigerator, make sure the
controls are still set to the recommended
setting as shown.
Style 1
Recommended
Setting "4"
®0®
®0®
corn
FREEZER
COLDER
Recommended Settings:4
CO_D REFRIGERATOR COLDER
Coldest S ettings:?
Style 2
Recommended
Setting "4"
Energy Saver Option (on some models)
The energy saver option turns off the heater which helps to reduce
moisture on the door hinge seal. The refrigerator uses more
energy when Energy Saver is off.
Press the control to ON to save energy when the environment
is less humid.
Press the control to OFF when the environment is warm and
more humid, or if you notice moisture on the door hinge seal.
EnetgySaver
Adjusting Controls
If you need to adjust the temperature in either the refrigerator or
freezer compartment,
use the settings listed in the chart below as
a guide.
For (Style 1) controls press the up or down arrow touch pads, or
for (Style 2) controls turn the dial to adjust the temperature.
Except when starting the refrigerator, do not adjust either control
more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
REFRIGERATORControl
one setting higher
FREEZER too warm/too little ice
FREEZER Control one
setting higher
REFRIGERATOR too cold
REFRIGERATORControl
one setting lower
FREEZER too cold
FREEZER Control one
setting lower
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents