Advertisement
PROBLEM
SOLUTION
Cookware not level
• Level the range. (See the Installation Instructions.)
on cooktop
• Insert coil correctly.
(Check to see if liquids
• Use cookware with a flat bottom.
are level in cookware)
Excessive heat on cooktop
• Choose cookware the same size or slightly larger than the element.
in areas around cookware
The oven temperature
• Adjust the oven temperature control. (See "Adjusting the oven temperature
seems too low or too high
control" section.)
Slow baking or roasting
• Increase baking or roasting time.
• Increase temperature
25°F.
• Preheat oven to selected temperature
before placing food in when
preheating is recommended.
• Choose bakeware that will allow 2 inches of air space around all sides.
• Open oven door to check food when timer signals shortest time suggested
in recipe.
• Oven peeking can make cooking times longer.
Baked items too brown
• Preheat oven to selected temperature
before placing food in oven.
on bottom
• Choose bakeware that will allow 2 inches of air space around all sides.
• Position rack higher in oven.
• Decrease oven temperature
15 ° to 25°F.
Unevenly baked items
• Level the range.
• Bake in center of oven with 2 inches of space around each pan.
• Check to make sure batter is level in pan.
Crust edge browns
• Shield edge with foil.
before pie is done
PROBLEM
CAUSE
The display is showing
• There has been a power failure. Press OFF/CANCEL to clear the display,
"PF"
then reset the clock. (See page 15.)
"F" followed by a
• Press OFF/CANCEL to clear the display. If an "F" code appears again, call
number shows on
for service. (See "If You Need Assistance or Service" on page 44.)
the display
If none of these items are causing your problem, see "Requesting Assistance or Service" on page 44.
43
Advertisement
