Advertisement
2. Holdovendoorsothatthe top edgeof each
hingehanger i s horizontal. Insert h ingehangers
intothefrontframehingeslots.
3. Rotate top of door toward range. Slide hinge
hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully seated
and engaged on the support pins.
4. Insert the door stop clip with the angular surface
at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.
5, Open the door completely and remove the door
removal pins. Save door removal pins for future
use,
6, Close the door.
Door stop
Range
clip
Door removal
pin hole
Door removal
pin hole
Hinge
.................
hanger
pins
Front frame
hinge slot
Angular
surface of
door stop
clip
The oven light will come on when you open the
oven door.
• Press the oven light pad.
_ __r.HT}
1. Unplug range or disconnect power.
2, Remove the glass bulb cover in the back of
the oven by turning
it counterclockwise.
4. Replace the bulb cover by turning it clockwise.
3. Remove the light bulb from its socket.
5. Plug in range or reconnect power.
Replace the bulb with a 40-watt appliance bulb.
NOTE: The oven light will not work during the
Self-Cleaning cycle.
il
41
Advertisement
