Hpet Support; Hpet Mode; Power On By Mouse; Pnp/Pci Configurations - Foxconn 671MX Series User Manual

6.13 HPET Support

This function increase the performance of the W indows
player. Setting this option to [Disabled] is suggested if your PC is running
under the W indows

6.14 HPET Mode

This option is used to set the mode of HPET.

6.15 Power On By Mouse

Allows you to use mouse to turn on the system.
6.16 Power On By Keyboard
Allows you to use specific keys on the keyboard to turn on the system.
6.17 KB Power On By Password
When "Power On By Keyboare" is enabled, press <Enter> to put in keys on the
keyboard to turn on the system.
6.18 Hot Key Power On
This option is used to select the hot key to turn on the system.

7. PnP/PCI Configurations

7.1 Init Display First
This item is used to set which display device will be used first when your PC
starts up.
7.2 Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select "Manual" and manually adjust interruption resources
in the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
7.3 IRQ Resources
If you set "Resources Controlled By" for "Manual", you can modify the item.
Press the <Enter> key, then manually set IRQ resources.
® XP operating system(OS).
PnP/PCI Configurations Menu
Chapter 2 BIOS Description
Vista Multimedia
®
29