Chapter Product Introduction; Chapter 1 Product Introduction - Foxconn 945P7AA series User Manual

Main Features
Size
ATX form factor of 12 inch x 9.6 inch
Microprocessor
Supports Intel
®
Supports FSB at 533MHz/800MHz/1066 MHz
Supports Hyper-Threading technology
Supports FSB Dynamic Bus Inversion (DBI)
Chipset
Intel 945P (North Bridge) + ICH7/ICH7R (South Bridge)
®
System Memory
Four 240-pin DDR2 DIMM slots
Supports Dual-Channel DDR2 533/667 DIMMs
Available bandwidth up to 5.3GB/s (DDR2 667) for Single-Channel mode
and 10.7 GB/s (DDR2 667) in Dual-Channel Interleaved mode
Supports 256 Mb, 512 Mb, and 1 Gb DDR2 technologies for x8 and x16
devices
Supports up to 4GB memory capacity
Supports non-ECC DIMMs only
USB 2.0 Ports
Supports hot plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB connectors
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 Protocol up to 480 Mbps transmission rate
Onboard Serial ATA (optional)
300 MBps transfer rate
Supports up to four S-ATA devices
Supports RAID 5, RAID 0, RAID 1, RAID 10, Matrix RAID (supported on ICH7R)
2
Pentium 4 processor in an LGA775 package
®
Chapter 1 Product Introduction