Foxconn 945P7AA series User Manual page 29

Addtional COM
Chapter 1 for detailed location)
This motherboard provides an additional serial COM
header for your machine.
Connect one side of a switching cable to the header,
then attach the serial COM device to the other side of
the cable.
Chassis Intruder Connector: INTR Refer to Item 14 on motherboard layout
in Chapter 1 for detailed location)
The connector connects to the chassis security switch
on the case. The system can detect the chassis intru-
sion through the status of this connector. If the connec-
tor has been closed once, the system will send a
message. To utilize this function, set "Case Open Warn-
ing" to "Enabled" in the "PC Health Status" section of
the CMOS Setup. Save and exit, then boot the operating
system once to make sure this function takes effect.
22
Chapter 2
: COM2 (Refer to Item 17 on motherboard layout in
Installation Instructions
RTS
SOUT
GND
RI
9
10
Empty DSR SIN
DTR
CTS
COM2
INTRUDERJ
1 2
GND
INTR
1
2