Power Supply - Foxconn 945P7AA series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
4-pin ATX_12V Power Connector: PWR2
The ATX power supply connects to PWR2 and
provides power to the CPU.
(For detailed location, please refer to Item 28 on
the motherboard layout in Chapter 1)
24-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make
sure that the power supply cable and pins are
properly aligned with the connector on the
motherboard. Firmly plug the power supply cable
into the connector and make sure it is secure.
(For detailed location, please refer to Item 19 on
the motherboard layout in Chapter 1 )
Note: We strongly recommended you use 24-
pin power supply. If you want to use 20-pin
power supply, you need to align the ATX power
connector according to the right picture.
14
Chapter 2 Installation Instructions
4-pin ATX_12V power connector
12V
GND
24-pin ATX power connector
GND
1
13
+3.3V GND
-12V
align the connector
3
4
12V
GND
2 1
+5V +5V_AUX
GND GND +12V +3.3V
+12V
PWROK
+5V
GND RSVD
+5V
+5V
GND GND GND
+5V
PSON
12
24