Simulating a Transmitter
When simulating the operation of a transmitter, the calibrator
regulates the loop current to a known value that the user selects.
A 12 to 28 V loop supply must be available. Insert the test leads
as shown below.
Simulate
Press to step output
up/down in 25 %
steps.
Press to toggle
Source or Simulate.
705
LOOP CALIBRATOR
OFF
MEASURE
SOURCE
VDC
SIMULATE
Loop Power
mA
SpanCheck
+
COM
Power
30 V dc
supply
max.
or
Press to scroll
up/down 0.01 mA.
Hold down to scroll
faster.
For 0.001 mA steps,
see "Pushbutton
Functions."
Press simultaneously
once for slow ramp
twice for fast ramp
three times for
stepped ramp.
rt05f.eps