Explanation Of International Symbols - Fluke 705 Instruction Sheet

To avoid possible electric shock or personal injury:
Never apply more than 30 V between any two
terminals, or between any terminal and earth
ground.
Inspect the test leads for damaged insulation or
exposed metal. Check lead continuity. Replace
damaged test leads before you use the meter.
Make sure the battery door is closed and latched
before you operate the calibrator.
Remove test leads from the calibrator before you
open the battery door.
Do not operate calibrator if it is damaged.
Do not operate the calibrator around explosive gas,
vapor, or dust.
Use the proper terminals, function, and range for your
measurement or output application.

Explanation of International Symbols

Symbol
J
M
W
T
P
W
Warning
Caution
International Symbols
Earth ground
Battery
Refer to this instruction sheet for information about
this feature.
Double insulated
Conforms to relevant Canadian Standards
Association directives.
Conforms to European Union directives
Direct current
Meaning