Safety - Fluke 1652C User Manual

1652C/1653B/1654B
Users Manual

Safety

See Table 1 for a list of symbols used on the product and in this manual.
A Warning identifies hazardous conditions and actions that could cause bodily
harm or death.
A Caution identifies conditions and actions that could damage the Imager or
cause permanent loss of data.
 Warnings: Read Before Using
To prevent possible electrical shock, fire, or personal injury:
Use the product only as specified, or the protection supplied
by the product can be compromised.
Do not use the product around explosive gas, vapor or in
damp or wet environments.
Do not use test leads if they are damaged. Examine the test
leads for damaged insulation, exposed metal, or if the wear
indicator shows. Check test lead continuity.
Use only current probes, test leads, and adapters supplied
with the product.
Measure a known voltage first to make sure that the product
operates correctly.
Do not use the product if it is damaged.
Have an approved technician repair the product.
Do not apply more than the rated voltage between the
terminals or between each terminal and earth ground.
Remove test leads from the tester before the tester case is
opened.
Do not operate the product with covers removed or the case
open. Hazardous voltage exposure is possible.
Use caution when working with voltages above 30 V ac rms,
42 V ac peak, or 60 V dc.
Use only specified replacement fuses.
Use the correct terminals, function, and range for
measurements.
Keep fingers behind the finger guards on the probes.
2