System Administration
5 Press
. You are now in Single User Mode.
[b]
6 Enter the following command:
passwd
7 Enter a new password at the New Password prompt.
8 Press [
ENTER]
9 Retype the password at the Retype new password prompt.
10 Press
. The password is changed.
[b]
11 Press
[b]
Resetting the Sentriant AG Database Password
The Sentriant AG database password is set during the install process. You cannot change your database
password with Sentriant AG later. If your database password gets changed by some other method after
Sentriant AG is installed, Sentriant AG will not be able to communicate with the database. In this case,
contact Technical Assistance Center (TAC) for assistance.
Changing the Sentriant AG Administrator Password
When the Password is Known
To reset the Sentriant AG administrator user interface User Name and Password when known:
See
"Modifying the MS root Account Password" on page
When the Password is Unknown
To reset the Sentriant AG administrator user interface User Name and Password when unknown:
Command line window
1 Create a text file with the following lines:
Compliance.ObjectManager.AdminUser=
Compliance.ObjectManager.AdminPassword=
Compliance.UI.FirstTimeConfigCompleted=true
Enter characters following the equal sign that are the password (for example,
2 Save the file and copy it to the Sentriant AG server (either MS or ES).
3 Log into the Sentriant AG server as root.
390
.
to continue booting.
66.
CwR0(tW
Sentriant AG Software Users Guide, Version 5.2
).