Resetting The Sentriant Ag Database Password; Changing The Sentriant Ag Administrator Password - Extreme Networks AG200 User Manual

2 As the machine boots, you are presented with a list of kernels. Interrupt the boot process by pressing
the key.
[a]
3 Press to edit the line.
[e]
4 Enter a space and type:
single
5 Press . You are now in Single User Mode.
[b]
6 Enter the following command:
passwd
7 Enter a new password at the New Password prompt.
8 Press [ .
ENTER]
9 Retype the password at the Retype new password prompt.
10 Press . The password is changed.
[b]
11 Press to continue booting.
[b]

Resetting the Sentriant AG Database Password

The Sentriant AG database password is set during the install process. You can not change your database
password with Sentriant AG later. If your database password gets changed by some other method after
Sentriant AG is installed, Sentriant AG will not be able to communicate with the database. In this case,
contact Technical Assistance Center (TAC) for assistance.

Changing the Sentriant AG Administrator Password

To reset the Sentriant AG administrator console User Name and Password when known:
See "Modifying the MS root Account Password" on page
To reset the Sentriant AG administrator console User Name and Password when unknown:
Command line window
1 Create a text file with the following lines:
Compliance.ObjectManager.AdminUser=
Compliance.ObjectManager.AdminPassword=
Compliance.UI.FirstTimeConfigCompleted=true
Enter characters following the equal sign that are the password (for example,
Sentriant AG Users' Guide, Version 5.0
61.
CwR0(tW
System Administration
).
327