Uniden DCT646-2 Series Quick Easy Steps Manual page 59

Hide thumbs Also See for DCT646-2 Series:
Table of Contents

Advertisement

Symptom
Suggestion
• Keep the handset
away from microwave
ovens,
computers,
remote
control
toys,
wireless microphones,
alarm systems,
intercoms,
room monitors,
fluorescent
lights,
Severe noise interference.
and electrical
appliances.
• Move to another
location
or turn off the source of interference.
• The handset was picked up before the second ring.
The Caller ID does not display.
• The call was placed through
a switchboard.
• Ca[[ your local telephone
company
to verify your Caller ID service is current.
Voice Message Indication
does
• Contact your local telephone
company
to make sure that your telephone
receives
FSK or SDT
not work.
message signaling.
You cannot register
the handset
" Charge the battery
pack for 15-20 hours.
• Remove the base ID (see "Replacing
the Base Setting"
on page 27) and register the handset
at the base.
(see "Register
the Handset to the Base" on page 50).
The handset doesn't
• Remove the base ID (see "Replacing
the Base Setting"
on page 27) and register the handset
communicate
with the
(see "Register
the Handset to the Base" on page 50).
other handsets.
• Make sure that you have registered
all handsets.
An extra handset
can't join
the conversation.
• Make sure there are not 2 handsets
already
using the 3-way conference
feature.
You cannot
make an intercom
• Make sure that the receiving
handset is not in use.
ca[[ with
another
handset.
If you still
have a problem.
• Ca[[ our customer
hot[ine
at i[-800-297-i[023.
[58]
TROUBLESHOOTING
www.uniden.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dct646 series

Table of Contents