Uniden DCT646-2 Series Quick Easy Steps Manual page 14

Low battery alert
When the battery pack is very low and need to be charged, the phone is programmed to
eliminate functions in order to save power.
The battery pack needs to be charged when:
- The empty battery icon appears.
- L,:,_._ B _tt.eP=.4 appears in the display.
If the phone is in standby mode, none of keys will operate.
If you are on a ca[[, complete your conversation as quick[:/
as possible, and return the handset to the cradle.
L ,:::,b._Ei:a L.L.e i."::::_
0
C[eaning the battery charging contacts
To maintain a good charge, it is important to dean the
charging contacts on both the handset and the base unit
once a month. Using water only, dampen a cloth to
dean the charging contacts. Then make sure to go back
over the charging contacts with a dry cloth before
returning the handset to the base to charge.
Caution: Do not use paint thinner, benzene, alcohol, or
other chemical products. Doing so may discolor the surface
of the telephone and damage the finish.
Contacts
*Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time.
For optimum
performance, be sure
to return the handset
to the base unit after a
telephone ca[[.
*Standby Mode
The handset is not in
use and talk/flash
has not been pressed.
*Talk Mode -
The handset is not in
the cradle and talk//
flash
or speaker has
been pressed enabling
adia[tone, iaLk
appears on the disp[ay.
www.uniden.com GETTING STARTED [13]