Sony Handycam DCR-DVD200 Operating Instructions Manual page 34

Shooting movies/still images
Perform _ Getting Started" from step 1 to 6 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
7,8
3
5
4
6
1
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
3
4
5
6
Install the battery pack or connect the AC adaptor (page 15).
Open the LCD screen while pressing OPEN.
The image is not displayed in the viewfinder when the LCD screen opens.
Set the mode dial to I_ (Still).
Turn the power on by sliding the POWER switch upward while pressing the
green button.
Insert a disc (page 26).
This sets your camcorder to standby.
34