To A Tape; Your Camcorder - Sony Handycam DCR-DVD200 Operating Instructions Manual

Dubbing a disc to a tape
Before operation
• Set [DISPLAY] in [K_(OTHERS) to LCD in
the SETUP display. (The default setting is
[LCD].)
• Press the following buttons to make the
indicators disappear so that they will not be
superimposed on the edited tape:
- DISPLAY/BATT INFO
- DISPLAY on the Remote Commander
- DATA CODE on the Remote Commander
1 Insert the recorded disc into your
camcorder.
2 Prepare the VCR for recording.
Insert a blank tape (or a tape you want
to record over') into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
VCR.
3 Play back the recorded disc on your
camcorder.
4 Start recording on the VCR.
Refer the operating instructions of your
VCR.
When you have finished dubbing
Stop recording on the VCR, then press • on
your camcorder.
106