Display - Sony Handycam DCR-DVD200 Operating Instructions Manual

Self-diagnosis display
Your camcorder has a self-diagnosis display
function.
This function displays the current state of your
camcorder as a 5-digit code (a combination of a
letter and figures), on the LCD display or in the
viewfinder. If a 5-digit code is displayed, check the
following list of codes. The last two digits
(indicated by KID) differ depending on the state of
your camcorder.
LCD display or viewfinder
Self-diagnosis display
• C:KIK]:K]KI
You can service your camcorder
yourself.
• E:K1K]:K]K1
Contact your Sony dealer or local
authorized Sony service facility.
Five-digit display
C:04:KIKI
C:13:K1K1
C:21:K1K1
C:3I:KIKI
C:32:K1K1
E:20:KIK]
E:61:KIK]
E:62:KIK]
E:93:KIK]
E:94:K1K]
Cause and/or Corrective Actions
• You are using a battery pack that is not an
InfoLITHIUM" battery pack.
-_ Use an _ InfoLITHIUM" battery pack. (page 127)
• The disc is faulty.
-_ Use a compatible disc with your camcorder. (page 6)
• Moisture condensation has occurred.
-_ Turn off your camcorder and leave your camcorder for
at least 30 minutes to acclimatize it. (page 130)
• A malfunction that you can service yourself other than
those above has occurred.
-_ Remove the disc and insert it again, then operate your
camcorder again.
-_ Disconnect the power cord of the AC adaptor or remove
the battery pack. After reconnecting/reinstalling the
power supply, operate your camcorder.
• A malfunction that you cannot service has occurred.
-_ Contact your Sony dealer or local authorized Sony
service facility and inform them of the 5-digit code.
(example: E:61:10)
If you are unable to rectify the problem a even if you try the suggested corrective actions a few
times, contact your Sony dealer or local authorized Sony service facility.
a
O
123