Search - Sony Handycam HDR-HC7 Operating Manual

$÷archi_ for the _af_i_ poi_ {8o_i_÷_)
4
/ During playback, press ZERO
SET MEMORY on the Remote
Commander at a point you want
to locate later on.
The tape counter is reset to "O:(X):O0"
and +0÷ appears on the screen.
_6o,n_,_ o:oo:oo
_4DVl080 £
KEiKZ _ [3iKZ_ _ D_£N!_
If the tape counter is not displayed,
press DISPLAY.
2
Press STOP when you want to
stop playback.
3
Press <<IREW.
The tape slops mttomalically when the
tape COtlnler reaches "O:O0:(X)."
Tile tape courtier relurns to the time
code display and the zero set memory
display disappears.
4
Press PLAY.
PhLYback starts from the point
designated "0:00:(XF' on tile tape
co/inter.
• Zero set nlemol2i will not functkln correctly if
there is a blank section between recorded
sections on file tape.
Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp.
You can locate the point where the
recording date changes.
SEARCH M.
STOP
4
| Press SEARCH M. on the Remote
Commander.
2
Press I<1<(Previous)/IHH(Next) to
select a recording date.
F43W D 60 6o,,,i_
DATE O1
Tocanceltheoperation
Press ZERO SET MEMORY again before
rewinding.
fO Notes
• There may be a discrcpancy of several seconds
between the time code and the tape counler.
To cancel the operation
Press STOP.
fO Notes
• Tim Date search will not hmction correctly
when there is a blank section between recorded
sections on file tape,
34