Sony Handycam HDR-HC7 Operating Manual page 67

3
Connect your recording device
(VCR or DVD/HDD recorder) to
your camcorder.
See page 65 fin"connection details.
/I
N. Start playback on your
camcorder, and recording on the
recording device.
Refer to the operntittg instructions
supplied with your recording device for
details.
• When dubbing to a DVD recorder hom your
canlcorder tllrough an i.LINK cable, you may
not operale your canlcorder on yotlr DVD
recorder even if ils hlstruclion t/lalltla] says yoll
can.
II you can sel tile input nlode to HDV or DV on
your DVD recorder and can input/output
pictures, k)llow lhe steps in "Dubbing 1oanother
device."
• When you use an i.LINK cable, the vide() and
sound signals are transmitted digitally,
producing high quality pictures.
• When an i.LINK cable is connected, the k)rmat
ol tile outpul signal (HDVouT _
or
DVOUT
) will be indicated on file LCD screen ol
your camcorder.
5 When dubbing is complete, stop
your camcorder and the
recording device.
O Notes
• When connecting \viltl an A/V connecling cable,
set [TV TYPE] according to tile playback
device (TV, etc.) (p. 60).
• To record tile date/linle and canlera settings data
when connected by the A/V connecting cable,
display lheln on tile screen (p, 61 ).
• The lollowing cannot be output via file _, HDV/
DV imerli_ce (i.LINK):
Indicalors
Pictures edited with [PICT.EPFECTI (p. 55)
or [D.EFFECTI (p. 54)
Titles that are recorded on ol]ler camcorders
• Pictures recorded in the HDV lomlal am not
output lrom the _ HDV/DV Interlace (i.LINK)
during playback pause or in ally playback mode
otller than nomlal playback.
• Note tile lollowing wllen connecling wilh an
i.LINK cable:
Tile recorded picture beconles rough when a
picture is paused on your camcorder while
recording 1o a VCR or DVD/HDD recorder.
[)atz_ codes (date/tinle/canlera settings data)
nlay not be displayed or recorded depending
on the device or application.
VOIl cannot record tile
pictllrc
and sound
separalely.
=
m.
g
67