Dubbingto Vcr/Dvd Device, Etc - Sony handycam DCR-HC28 Operating Manual

Dubbi_g/£d#i_g
Dubbingto VCR/DVD device, etc.
You can copy tile picture played back on your camcorder to ()tiler recording devices (VCR/
DVD device, etc.).
You can connect your camcorder to a VCR/DVD device, etc., using the A/V conuectiug cable
([_), the A/V connecting cable with S VIDEO ([_), or the i.LINK cable ([_).
Connect your camcorder to the wall outlet using the supplied AC Adaptor for this operation
(p. 12). Refer also to the instruction manuals supplied with the devices to be connected.
AN OUT jack
i.LINK VCR/DVD
device
To i.LINK jack
, _ : Signal flow
[] A/V connecting cable (supplied)
[] A/V connecting cable with S
VIDEO (optional)
When connecting to another de_ice via the S
VIDEO jack, by using the A/V connecling
cable wilft an S VIDEO cable, pictures can be
reproduced more lifilhfully than with tile
supplied A/V cable connection. Connect the
white and red plugs !lellkigbl audio) and S
VIDEO plug (S VIDEO channel) of all A/V
connecling cable. In this case. the yellow
(slandard vide(>) plug connection is nol
necess*wy. S Vff)EO connection only will nol
output audk).
[] i.LINK cable (optional)
Use an i.LINK cable to connect your
camcorder to another device equipped with an
i.LINK .jack. The video and audio signals are
transmitted digilally, producing high quality
pictures and sound. Note lhal you cannol
outpul picture and sound separately.
• When you are
connecting
your camcorder lo a
monaural device, connect tim yellow plug of lhe
A/V connecting cable 1o the video jack, and tile
red (right channel) or the white (left channel)
plug to tile audio jack on tile VCR/TV.
• When you connect a device via im A/V
connecting cable, _l [DISP OUT] to [LCD] (tile
defimft _uing) (p. 47).
48