Sony handycam DCR-HC28 Operating Manual page 55

The CHG (charge) lamp flashes while the battery pack is being charged.
• Attach the battery ?ack to the camcorder correctly (p. 12). If the ?r()blem ?ersists, disconnect
the AC Adaptor from the _all outlet and contact your Sony dealer. The batte U pack may be
worn-out.
The power turns off frequently although the remaining battery time indicator
indicates that the battery pack has enough power to operate.
• A problem has occurred in the remaining barrel3 time indicator, or the b ,ttcry pack has not
been charged enough. Fully charge the batte U again to correct the indication (p. 12).
The remaining battery time indicator does not indicate the correct time.
• Ambient temperature is too high or too ]o_x,or the battery pack has not been charged enough.
This is not a mall),nction.
• Fully charge Ihe battery again. If the problem persists, the batte U may be _orn-out. Replace
it with a new one (p. 12, 66).
• The indicated time may not be correct in certain circumstances. For example, when you open
or ch)se the LCD panel it takes about I minute to display the correct remaining batteW time.
The battery pack discharges too quickly.
• Ambient temperature is too high or too 1o_, or Ihc battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the batte U may be _orn-out. Replace
it with a new one (p. 12, 66).
A problem occurs when the camcorder is connected to the AC Adaptor.
• Turn off the power, and disconnect the AC Adaptor from the wall outlet. Then, comlect it
again.
g
g
g
=
A rippling effect appears on the LCD screen when you touch it.
• This is not a malfunction. Do not press hard on the LCD screen.
An unknown picture appears on the LCD screen or viewfinder.
• The camcorder is in [DEMO MODEl (p. 47). Touch the LCD screen or insert a cassette to
cancd [DEMO MODEl.
An unknown indicator appears on the screen.
• A _ arning indicator or message appears on the screen (p. 61).
Continued._ 55