Playing Thepicture Onatv - Sony handycam DCR-HC28 Operating Manual

Playingthe pictureon a TV
You cau connect your catncorder to the input.jack of a TV or a VCR using the A/V connectiug
cable ([_) or the A/V connectittg cable with S VIDEO ([_). Cotntect your camcorder to the
wall outlet using the supplied AC Adaptor lk_r this operatiott/p. 12). Refer also to the
instruction manuals supplied with the devices to be connected.
32
, ,_ : Signal flow [_-
[] A/V connecting cable (supplied)
[] A/V connecting cable with S
VIDEO (optional)
When connecting to another de_ ice via the S
VIDEO jack, by using the A/V connecting
cable wilh an S VIDEO cuble, pictures can be
reproduced more laithfully than with lhe
supplied A/V cable connection.
Connect lhe while and md plugs (lelt/rigla
audio) and S VIDEO plug (S VIDEO
channel) of an A/V connecling cable. In this
case, the yellow (slandard video) plug
connectkm is not necessary. S VIDEO
connection only will not oulput audio.
• You can display the lime code on the TV screen
by seuing [DISP OUT] to [V-OUT/LCD]
(p. 47).
Whenconnecting y ourcamcorder toa
TVthrough a VCR
Connect >our camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1. VIDEO 2.
etc.), if the VCR has an input selector.
When your TV is monaural (0nly one
audio
input jack)
Connect the yellow plug of the A/V
cotmectiug cable to the video input jack and
cotmect the white (left chatmel) or the red
(right channel) plug to the audio input.jack
of your TV or VCR.