Sony handycam DCR-HC28 Operating Manual page 60

?ro_bbs_ooti_ (8o_ti_u÷d)
Time code and other information appear on the display of the connected
device.
• get [DISP OUT] to ILCDI x_llile connected with an A/V connecting cable (p. 47).
You cannot dub correctly using the A/V connecting cable.
• The A/V connecting cable is not connected propcrl). Make sure that the A/V connecting
cable is connected to the input jack of another device for dubbing a picture from your
camcorder (p. 48).
New sound added to a recorded tape is not heard.
• Acljust [AUDIO MIXI from the ISTll (original sound) side until the sound is heard
appropriately (p. 52).
Pictures from connected devices are not displayed correctly.
• The input signal is not NTSC (p. 64),
The computer does not recognize your camcorder.
• Disconnect the cable from the computer
and camcorder,
then connect it again securely.
• Disconnect the cable, from the computer and camcorder_ restart the computer_ then connect
them again correctly.
You cannot view the video your camcorder is seeing on the computer.
• Disconnect the cable from the computer, turn on the camcorder, then connect it again.
You cannot view the video recorded on a tape on the computer.
• Disconnect the cabk' flol]fl[ho computer, then connect it again.
6O