Sony Cyber-shot DSC-S75 Operating Instructions Manual page 93

Reinstall the USB driver when using Windows 98, Windows
98SE, Windows Me and Windows 2000 Professional
Pertbnn all steps withont skipping.
1 Turn on your computer and allow Windows to load.
2 Connect the USB jack on the camera and the computer with the
supplied USB cable.
3
4
Insert a "Memory Stick".
Connect the AC power adaptor to your camera and then to a wall
outlet (mains), and turn on the power of your camera.
Open "Device Manager" on Windows.
For Windows 98, Windows 98SE and Windows Me users:
@ Open [Control Panel] from [ _ My Computer], then double-click
[System].
@ "System properties" is displayed. Click the [Device Manager[ tab located at
the top.
@ Click [ _i} Sony DSC] in [ _' Other devices], then click the [Delete (E)]
button located at the lower-right corner.
For Windows 2000 Professional users:
* Log in with the permission o1"administrator.
(_ Open [Control Panel] from [ _ My Computer], then double-click
[System].
@ "System properties" is displayed. (?lick the [Hardware] tab located at the top,
then click the [Device Manager (D)] button.
@ Click [View] in [Device Manager[, then click [Devices by type (E)].
@ Right-click [ _* Son?,, DSC] in [ _:] Other devices], then click [Delete (E)].
6
7
8
t-,
o
5"
After the message appears to verify that you delete the device, click
"OK." _
o
Turn off the camera, disconnect the USB cable, and restart the
computer.
Install the USB driver in the supplied CD-ROM to the computer
following the procedure on page 33.
93