Sony Cyber-shot DSC-S75 Operating Instructions Manual page 33

Before connecting your camera to ?:our personal computer, install the USB driver to
the computer. The USB driver is included with the application software in the CD-
ROM which is snpplied with your camera.
Be sure to complete installation of the USB driver before connecting the
USB cable. If you connect the USB cable first, you will be unable to
install the USB driver properly.
See page 93 tbr corrective measures it'the USB cable was connected betbre installing
the drb'er and the drb'er software could not be installed correctly.
For Windows 98198SE/Me and Windows 2000 users
0 Turn on your personal computer and allow Windows to load.
Do not connect the USB cable in this step.
Insert the supplied CD-ROM in the CD-ROM drive of your personal
computer.
The application software screen appears.
O Click "USB Driver Installation for Windows 98/98SEINe and
Windows 2000".
USB driver installation starts.
Follow the on-screen messages to install the USB driver.
Your personal computer may restart.
Connect the USB jack (mini-B) on your camera with the USB
connector on your personal computer using the supplied USB
cable.
_t0 the USB connector !0 !h?USB jack
_mm=-u)
Push the
USB cable connectorin as
Personal computer far as it will go.
O
Insert a "Memory Stick" into your camera, connect the AC power
adaptor and turn on your camera,
"USB MODE" appears on the L(D screen of your camera and the camera is set
to communication standby mode. Your personal computer recognizes the
camera, and the Windows Add Hardware Wizard starts.
"U
o
33