Still Images To Print - Sony Cyber-shot DSC-S75 Operating Instructions Manual

When "CHANGE MEMORY
STICK" is displayed, eject the
"Memory Stick."
"INSERT MEMORY STICK"
appears.
Insert another "Memory
Stick."
"RE( ORDING" appears. When
copying is completed,
"COMPLETE" appears.
To end copying, select [EXIT]
with A", then press 0.
To copy the image to
another "Memory Stick"
Select [CONTINUE] with Air in step
8, press 0, then repeat steps 7 and 8.
To cancel copying part-way
Select [CANCEL]
with 41/1_ in step 3
or [EXIT] with 411_ in step 6, then
press 0.
Notes
• It'you do not select [EXIT] after
"COMPLETE" appears and instead inselt
a new "Memory Stick," tile same image is
copied again
• "_\m cannot copy uncompressed images.
• You cannot copy images that are bigger
than 5 MB at once. If"NOT ENOUGH
MEMORY" appears or _ flashes on the
INDEX screen, cancel some images to
copy and try again.
Selecting still images
to print (PRINT)
Mode dial: []
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
1
2'4_ W3
1
Set the mode dial to [_.
2
In single-image mode
Display the image you want to
print with _1/1_.
In triple-image mode
Press the zoom W button twice in
the single-image mode to turn to
the triple-image mode.
Display the image you want to
print with 41/1_.
3
Press
MENU.
The menu appears.
4
Select [PRINT] with _1/1_in
single-image mode, or with
A/T in triple-image mode,
then press e.
The _ (print) mark is marked on
the displayed image (or the
middle-positioned image in triple-
image mode).
76