Images In Macro - Sony Cyber-shot DSC-S75 Operating Instructions Manual

Recording images in
macro
Mode dial: I_IISIAIMISCNIH
The macro recording is used when
zooming up a little subject, such as
flowers, insects.
1
2
Set the mode dial to 101, S, A,
M, SCN or H.
Clear the menu, and press
the control button I_ (_).
The _ (macro) indicator appears
on the LCD screen.
You can record a subject as close
as about 4 cm (1 5/8 inches) from
the lens surface with the zoom set
all the way to the W side, or about
20 cm (8 inches) with the zoom set
all the way to the T side.
To return to normal
recording mode
Press the control button I_ (_) again.
The _ indicator disappears.
Notes
•5_u cannot recmd images in illacro with
the LANDSCAPE mode of tile SCENE
SELECTION fimcfion
• When recording images in macro, use the
LCD screen. If you record using the finder,
the range visible in the finder may differ
fiom the actual recording range
Adjusting the
exposure
(EXPOSURE)
Mode dial: I_1/S/A/SCN/_
At[justs the exposure value which is set
in the automatic ac!iustment.
1
2
3
Set the mode dial to I_, S, A,
SCN or _!_.
Press I'_.
Select the desired exposure
value with the jog dial.
Adjust the exposure value while
checking the brightness of the
backgronnd.
You can select values ranging from
+2.0 EV to 2.0 EV in steps of 1/3
E\L
Note
Ifa subject is unde! exhemely bright or dark
sitnations, or the flash is used, the exposure
adjustment may not be effective.
o
e,
(n
t_
o
_Q
61