Table of Contents
Advertisement
On
operating
voltage
Betble
opelating
tile systenl
check that tile operating
voltage
of your system is identical
with the voltage
of
your local power supply
On
safety
• Tile system
is not disconnected
fronl tile AC powe!
source (mains)
as long as it is connected
to the wall
outlet, even if the system
itself has been turned oft'.
• Unplug tbe system
from tbe wall outlet (mains)
if it
is not to be used for an extended
period of time. To
discmmect
the power cord (mains lead), pull it out by
the plug. Never pull tbe cord itself
• Should any solid object or liquid fall into the system,
tmplug the system and have it checked
by qualified
personnel
belore operating
it any fi_rther.
• For customers
in United
States
One blade of the plug is wider than other for tbe
pulpose
of safety and will fit to the wall outlet only
one way If you are rulable to inseit the plug fiflly into
the outlet, contact your dealer.
• AC power cord must be changed only at the qualified
seia'ice shop.
On
placement
• Do not place tile system
in an inclined
position
• Do not place the system
in locations
where
it is:
Extlemely
hot or cold
Dusty or dilty
Ve!), lmlnid
Subject to vibrations
Subject to direct starlight.
• Use cantion
when placing
the system or speakers
on
surfaces
tbat have been specially
treated (witb wax,
oil, polish,
etc) as staining or discoloration
of the
surface may resnlt
On
heat
build-up
• Although
tile systeln beats up during
opelation
this
is not a malfimction.
• Place tile system
in a location with adequate
ventilation
to prevent
heat bnlld-up
in the system.
• If you continuously
use this system at a large volmne,
the cabinet tempera0;re
of the top, side and bottom
rises considerably
To avoid burning
youlself,
do not
touch the cabinet
• To prevent a malfimction,
do not covel the
ventilation
hole tbr the cooling
fan
On
operation
• Iftbe
system is blought
directly
frolll a cold to a
warm
location, o! is placed
in a very damp room,
moistme
may condense
on tile lens inside the system.
Shonld this occur, the system
will not operate
properly
Remove
the disc and leave the system
turned on t_r about an hour until the moisture
evaporates.
• When you move the system,
take out any disc
If you have any questions
or problems
concerning
your
system, please consult
your nearest
Soil?, dealer
Notes
on
discs
• Befole playing
clean the disc with a cleaning
cloth.
Wipe tile disc from the center out.
• Do not use solvents
such as benzene,
ttfinne!,
commercially
available
cleaners
or anti-static
splay
intended
tbr vinyl LPs.
• Do not expose
the disc to direct sunlight or heat
sources such as hot air ducts nor leave it in a car
parked
in direct starlight.
• Do not use discs encircled
with a protection
ring.
Tiffs may cause a malfimction
to the system
• When using discs that have glue or similar tack?,
substance
oil the label side of the disc or that used a
special ink when the label was printed,
there is a
chance that the disc or label may become
attached
to
parts inside this system
When this occurs, it may not
be possible
to remove the disc, and may also canse
this system
to malfmlction.
Be sure to check tbat the
label side of tbe disc is not sticky betbre using.
The following
b,pes of disc should not be used:
Rental or used discs witb attached
seals where the
ghie extends
beyond tile seal. Tile perimetel
of the
seal oil tile disc is tacky
Discs that have labels printed
using a special
ink
that feels tacky when touched.
• Discs with non-standard
slmpes (e.g., healt, square,
star) cannot be played back on tiffs system.
Attempting
to do so may damage
the system. Do not
use such discs.
40 o8
Hide quick links:
Advertisement
Table of Contents
