Sony DAV-FC7 Operating Instructions Manual page 72

Adjusting the speaker
balance and level by using the
test tone
1
Press DVD SETUP in stop mode.
The Setup Display appears.
Press t" or 4, repeatedly to select
"SPEAKER SETUP," then press
ENTER or -_.
Press "f"or 4, repeatedly to select "TEST
TONE," then press ENTER or ->.
Press I" or 4, repeatedly to select "ON,"
then press ENTER.
You will hear the test tone fi'om each
speaker in sequence.
5 From your listening position, adjust the
value of "BALANCE" and "LEVEL"
using ÷/W4,/-).
When selecting"BALANCE," lhe test lone
is emitted from both let_ and right speakers
simultaneously.
When selecting "LEVEL," the lest tone is
emitted fi'om only lhe speaker which you
are adjusting.
6
Press ENTER when you have finished
making adjustments.
7 Press't" or 4, repeatedly to select "TEST
TONE," then press ENTER.
8 Press ,I, or 4, repeatedly to select
"OFF," then press ENTER.
Note
When yoll adjus_ the speaker settings, the sound cuts
ot] _ for a llloment.
2
3
4
Tip
To adjust lhe balance or lhe level without
listening lo lhe lest 1one, select"BALANCE" or
"LEVEL" in step 3 and press ENTER. Then
adjust the balance or level using 1"/4, and press
ENTER.
Setting the speakers by using
the front panel display on the
system
You can set the speakers by using the amp menu
that is displayed in the front panel display.
1
Press AMP MENU repeatedly untilthe
item you want to set appears in the
front panel display.
• SP. SETUP
Sets lhe speaker size, distance, and
placement.
• LEVEL
Sets lhe balance and level of the each
speaker, and turns lhe test tone on or ofl_
2
Press "f" or 4, to select the desired item,
then press ÷ or-> to select the desired
setting.
You can set lhe following items:
• SP. SETUP
CENTER YES (yes)
(centre speaker)
NO (no)
SURR.
YES (yes)
(surround speakers)
NO (no)
F.D. 1.0 to 7.0 metres
(front speakers
distance)
72GB