Sony DAV-FC7 Operating Instructions Manual page 20

Required cords
Video cord for connecting a TV
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriale jacks on the
components.
Terminals for connecting video components
Connect the To the
TV MONITOR OUT ,jack
VCR VIDEO I jacks
Digital satellile receiver VIDEO 2 jacks
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is not output via VIDEO OUT and AUDIO
OUT L/R jacks (VIDEO I).
• When you use the VIDEO 1 line ouiput s, please sei the system to 2CH STEREO mode. If the syslem is nol in 2CH
STEREO mode, the line oulputs m_y not ti_nction properly.
• When lhe mode oflhe system is set to "DVD," the signal is output from the S VIDEO OUT or COMPONENT OUT
jacks.
• When lhe mode oflhe system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," lhe signal
is output only from the COMPONENT OUT jacks.
Tips
• When using tile S video jack instead of the video jacks, your TV monitor must also be connected via an S video
jack. S video signals are on a separate bus from the video signals and will not be output lhrough the video jacks.
• When using the COMPONENT VIDEO OUT jacks (Y, Pa/Ca, P_t/Cf0 instead oflhe video jacks, your TV monitor
must also be connected via COMPONENT VIDEO OUT jacks (Y,P_/C_3, PR/C_0. If your TV accepts progressive
tb*_nat signals, you must use this connection and set "COMPONENT OUT" to "PROGRESS[VE" in "SCREEN
SETUP" (page 68).
20GB