Sony DAV-FC7 Operating Instructions Manual page 16

Note
Do not calch the speaker cable insulation in the SPEAKER jack.
Tip
Connect lhe speaker cane after bending the speaker wire _t the end of the insulation. This prevents *he speaker cable
from being caught in the SPEAKER jack.
To avoid short-circuiting the speakers
Short-circuiting oflhe speakers may damage lhe system. To prevent lhis, be sure to lbllow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not louch
anod_er speaker jack or the bare wire of another speaker cord.
Examples of poor conditions of the speaker cord
Stripped speaker cord is Stripped cords are touching
touching another speaker each other due to excessive
terminal, removal of insulation.
After connecting all the components, speakers, and AC power cord, output a test 1one |o check lhat all
lhe speakers are connected correctly. For details on outpulting a test lone, see page 71.
If no sound is heard l?om a speaker while outputting a lest tone, or a test lone is output from a speaker
olher lhan lhe one currently displayed in the front panel display, the speaker may be short-circuited. If
lhis happens, check the speaker connection again.
Note
Be sure to malch the speaker cord _olhe appropriate terminal on the components: @ to @, and @ to @. If the cords
are reversed, the sound will lack bass and may be distorted.
16 GB