With The Supplied Remote - Sony DVP-C670D Operating Instructions Manual

Controlling Your TV or AV Receiver (Amplifier) with the
Supplied Remote []
&
By adjusting the remote signal, you can control your TV
or AV receiver (amplifier) with the supplied remote.
Controlling IVs with the remote
TV/DVD-
switch -- I1(_)
buttons
C) C)c_C_C:
C5_D_5_
_o
I Slide the TV/DVD switch to TV.
2
Hold down I/_), and enter your TV's manufacturer's
code (see the table) using the number buttons,
3 Release I1(_.
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
TV
Manufacturer Code number
Sony (default) 01
Grundig 11
Hitachi 24
Loewe 45
Nokia 15, 16, 69
Panasonic 17, 49
Philips 06, 07, 08
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
7O