Sony DVP-C670D Operating Instructions Manual page 69
Cd/dvd player
Hide thumbs
Also See for DVP-C670D:
- Dimensions (1 page) ,
- Service ma (123 pages) ,
- Training manual (108 pages)
Table of Contents
Advertisement
• BALANCE
You can vary the balance
of the left and right speakers
as
follows.
Be sure to set "TEST TONE"
to "ON" for easy
adjustment
(see • TEST TONE below).
The default
adjustments
are in parentheses.
• FRONT (0dB)
Adjust the balance
between
the front left and right
speakers
(_dB
ILl to +6dB [R], 0.5dB increments).
• REAR (0dB)
Adjust
the balance
between
the rear left and right
speakers
(-6dB ILl to +6dB [R], 0.5dB increments).
To return
to the default
setting
Select the item, then press CLEAR.
• LEVEL
You can vary the level of each speaker
as follows.
The
front speaker
level becomes
the criterion
for adjusting
the
other speakers.
Be sure to set "TEST TONE"
to "ON" for
easy adjustment
(see • TEST TONE below). The default
adjustments
are in parentheses.
• CENTER (0dB)
Adjust the level of the center speaker
(_dB
to +6dB,
0.SdB increments).
• REAR (0dB)
Adjust the level of the rear speakers
(-JodB to +6dB,
0.5dB increments).
• SUBWOOFER
(0dB)
Adjust the level of the subwoofer
(-10dB to +10dB,
0.5dB increments).
To return
to the default
setting
Select the item, then press CLEAR.
• TEST TONE
The speakers
will emit a test tone. Use this when you use
the 5.1CH OUTPUT connectors and adjust the BALANCE
and LEVEL.
• OFF: The test tone is not emitted from the speakers.
• ON: The test tone is emitted
from each speaker
in
sequence.
When you select one of the "SPEAKER
SETUP" items, the test tone is emitted
from both left
and right speakers
simultaneously.
Note
When
you adjust
the speaker
settings,
the sound
cuts off for a
monlent,
Adjusting
the speaker
volume
1
After you stop playback, select "SPEAKER SETUP"
in the setup display.
2
Select "TEST TONE" and set "TEST TONE" to "ON."
You will hear the test tone from each speaker
in
sequence.
3
From your listening position, select "BALANCE" or
"LEVEL" and adjust the value of "BALANCE" using
4-/"_
and "LEVEL" using t/{,.
The test tone is emitted
from both left and right
speakers
simultaneously.
4
Select "TEST TONE" and set "TEST TONE" to "OFF"
to turn off the test tone.
To adjust the volume
of all the speakers at one
time
Use the receiver's
(amplifier's)
volume
control.
o.
&
e-
B
O9
Advertisement
Table of Contents
