Sony HT-SS380 Operating Instructions Manual page 8

[] Input indicator
Lights up to indicate the current input.
HDMI
- The INPUT MODE is set to "AUTO", and
when the receiver recognizes the equipment
connected via all HDM[ IN jack (page 19).
- The TV INPUT detected Audio Return
Channel (ARC) signals (page 38).
COAX
The VIDEO input is selected.
OPT
- The INPUT MODE is set to "AUTO" and the
source signal is a digital signal being input
through the OPT IN jack (page 18).
- The INPUT MODE is set to "OPT" (page 43).
[] Tuning indicator
Lights up to indicate the current status of the
radio station (page 29).
TUNED
When receives a radio station.
ST
When broadcasts in stereo mode.
[] MUTING
Lights up when the muting function is activated.
[] DTS indicator
Lights up the respective indicator when the
receiver is decoding the corresponding DTS
format signals.
DTS
DTS
DTS 96/24 DTS 96 kHz/24 bit
Note
When playing a DTS format disc, make sure that
you have completed the digital connections.
[] NEO:6
Lights up when DTS Neo:6 Cinema/Music
decoder is activated (page 33, 34).
[] DTS-HD indicator
Lights up the respective indicator when the
receiver is decoding the corresponding DTS-HD
format signals.
DTS-HD LBR DTS-HD Low' Bit Rate
Audio
DTS-HD MSTR DTS-HD Master Audio
DTS-HD HI RES DTS-HD High Resolution
Audio
[] Message display area
Display the volume level, selected input source,
audio input signal, etc.
[] Dolby Pro Logic indicator
Lights up the respective indicator when the
receiver performs Dolby Pro Logic processing.
This matrix surround decoding technology can
enhance input signals.
IT1 PL Dolby Pro Logic
I-rl PLII Dolby Pro Logic 1I
8GB