Sony HT-SS380 Operating Instructions Manual page 44

You can make various adjustments for HDMI
settings.
• CTRL HDMI
Lets you turn the Control for HDMI function
on or off. For details, see ""BRAVIA" Sync
Features" (page 35).
• PASS THRU
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode.
• ON: The receiver continuously outputs
HDMI signals from the receiver's HDMI
TV OUT jack.
• AUTO: When the TV is turned on while the
receiver is in the standby mode, the receiver
outputs HDMI signals from the receiver's
HDMI TV OUT jack. Sony recommends
this setting if you use a "BRAVIA" Sync
compatible Sony TV. This setting saves
power in the standby mode when compared
with the "ON" setting.
Notes
• The power saving function may not work for some
TVs compatible with the "BRAVIA" Sync. If this
is the case, set "PASS THRU" to "ON".
• Depending on your equipment, it may take time
before image or sound is output.
You can customize the settings of the receiver.
• DIMMER
Lets you adjust the brightness of the display
panel in 3 levels.
• DIM MAX
• DIM MID
• DIM OFF
• SLEEP
Lets you set the receiver to turn off
automatically at a specified time.
• 2-00-00
• 1-30-00
• 1-00-00
• 0-30-00
• OFF
When Sleep Timer is being used, "SLEEP"
indicator lights up on the display panel.
Tip
To check the remaining time before the receiver
turns off, select "SLEEP" using the AMP MENU.
The remaining time appears on the display panel. To
cancel the Sleep Timer, select "OFF".
• AUTO STBY
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
• STBY ON: Switches to standby mode alter
approximately 30 minutes.
• STBY OFF: Does not switch to standby
mode.
Notes
• This function does not work when TUNER input is
selected.
• If you use the Auto Standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
44G8