7: Connecting The Ac Power Cord(Mains Lead); Initializing The Receiver - Sony HT-SS380 Operating Instructions Manual

7: Connecting the AC
power cord(mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
Be sure to turn the receiver on when the video
and audio signals of a playback equipment are
being output to a TV via the receiver. Unless
the power is turned on, neither video nor audio
signals will be transmitted.
AC power cord (mains lead)
Initializing the receiver
Before using the receiver for the first time, "u
initialize the receiver by performing the
"o
following procedure. This procedure can also _
m,
be used to revert back to the factory default
settings. _.
Be sure to use the buttons on the receiver to ¢D
perform this operation.
¢D
<
¢D
To the wall outlet
i/(b
1
2
Press I/_ to turn off the
receiver.
Hold down I/_ for 5 seconds.
Alter "CLEARING" appears on the
display panel for a while, "CLEARED"
appears.
All the settings you have changed or
adjusted are reset to the default settings.
23G8