Reversespeed Control Levers Adjustment - Snapper SW20 Series Operator's Manual

RegWr Maintenance
ReverseSpeed Control LeversComfort
Adjustment
The amount of pressure necessary to depress the Reverse
Speed Control Levers (A, Figure 39) can be adjusted to meet
the comfort needs of the operator.
1. Disengagethe PTO,engage the parking brake and turn
off the engine.
2. To increase the amount of pressure necessaryto
depress the ReverseSpeed Control Levers turn the lock
nut (B) CLOCKWISEuntil the desired comfort level is
achieved. To decreasethe amount of pressure
necessary to depress the ReverseSpeed Control Levers
turn the lock nut COUNTER-CLOCKWISE u ntil the
desired comfort level is achieved.
3. Repeat process for other side of the unit.
NOTE. Both ReverseSpeed Control Levers should be
adjusted so that it takes the same amount of pressure to
depress both handles.
Figure 39, ReverseSpeed Control Levers Comfort
AdjusflrTent
A. Reverse Speed Control Levers
B. Lock Nut
35