Input Label; Sleep Timer - Sharp AQUOS LC-32D62U Operation Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT FLASHBACK
@©
VOL CN
FREEZE MENU
0 ®
Press INPUT to select the desired input
source.
Press MENU to display the MENU screen, and
then press _1/I_ to select "Setup".
Press A/T to select "Input Label", and then
press ENTER.
Press A/T/_/I_ to select the new name for
the input mode, and then press ENTER,
Example
Allows you to set a time when the TV automatically
switches to standby.
I
-- FAVORITECH -- II
Press SLEEP.
• The remaining time displays when the sleep timer
has been set.
I Sleep Timer: Remaining 30 •
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• if you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
[Z Z-'I so I-I 60 I
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby when the remaining time
reaches zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
• You cannot change labels if the INPUT SOURCE is TV.
Q- 33