Antenna Setup-Digital - Sharp AQUOS LC-32D62U Operation Manual

Basic adjustment settings
Channel memory setting
Press MENU to display the MENU screen, and
then press </I_ to select "Setup".
Press A/• to select "CH Setup", and then
press ENTER.
• if you already set the Secret No., input the 4-digit
secret number here. See page 40 for setting a
secret number.
Press A/• to select "CH Memory", and then
press ENTER.
Press A/• to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
When viewing ANALOG broadcasts:
Press </I_ to select the channel to skip,
and then press • to move down.
Press 4/I_ to select "On", and then press
ENTER,
When viewing DIGITAL broadcasts:
Press A/• to select the channel to skip,
and then press </1_ to select "On".
• On: Skips channels.(Channelselection disabled using CH
A/V.)
• off: Does not skip channels.(Channelselectionenabled
using CH A/V.)
Press MENU to exit.
• Make sure what kind of connection is made with your TV.
Press A/• to select "Signal Strength".
• The signal strength of DiGiTAL channel is
displayed. The signal information is based on the
current channel.
Press MENU to exit.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL,
Press A/• to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check the
signal strength of the selected channel.
• Make sure the signal is strong enough for each
channel.
Ohannel 9trength
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup -
DIGITAL" screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU to display the MENU screen, and
then press </I_ to select "Setup".
Press A/• to select "Antenna Setup -
DIGITAL", and then press ENTER.
Press MENU to exit.
• This function is available for DIGITAL (Air) only.
Q- 24