Power Cord Installation
DO NOT connect the power
cord to the power source
during
Otherwise,
injuries could occur.
Items Needed
Page 11
To connect the power cord to the machine:
1.
Figure 6.
2.
Page 11
this
procedure.
electrocution
Qty
Figure 6
3.
4.
5.
Figure 7
Figure 7.
6.
7.
Figure 7
8.
Note: The strain relief must be tightened
against the outer jacket of the power cord.
Avoid over-tightening the strain relief or it
may crush the cord and cause a short.
9.
10.
Step 6