Schwinn 231 Owner's Manual page 23

Chang_g
Levels: You can increase or decrease the resistance level by
pressing the UP or DOWN buttons at any time.
To STOP or PAUSE the program: Press the START / PAUSE button to
stop or pause your workout. The display will show "PRESS RESULT OR
PRESS START': Then if you press the RESULTS button the computer will
show your workout results and end the program, or if you press START /
PAUSE the computer will resume the program where you left off.
I Console Operation - Selecting a profile program
Select Program: Press any button to power up the console and "ENTER
PROGRAM" appears in the alphanumeric display. To access the profile
programs, scroll through the display by using the UP or DOWN buttons
until you reach "PROGRAMS", then press ENTER. The program profile and
name will appear in the display. Use the UP or DOWN buttons to select
your desired program. Press ENTER to confirm your selection.
Enter Level: You will then be prompted in the alphanumeric display to
"ENTER LEVEE', (1 - 16). Select the desired resistance level by using the
UP or DOWN buttons and then press ENTER to confirm your selection.
The default resistance level will be the last level a user entered (previous
workout).
EnterTime: You will then be prompted in the alphanumeric display to
"ENTERTIIVIE". Select the desiredTime by using the UP or DOWN buttons
and then press ENTER to confirm your selection. The defaultTime will be
the lastTime a user entered (previous workout). The minimum time you can
enter is 2:00.
Enter Weight: You will then be prompted in the alphanumeric display to
"ENTRWEIGHT (Ibs. or kgs.)': Select the appropriate weight by using the
UP or DOWN buttons and then press ENTER to confirm your selection.
Start: You will then be prompted in the alphanumeric display to "PRESS
START". The preset program you selected will display confirming your
selected program. You can now begin exercising!
To STOP or PAUSE the program: Press the START / PAUSE button to
pause your workout. The display will show "PRESS RESULT OR PRESS
START". Then if you press the RESULTS button the computer will show
your workout results and end the program, or if you press START / PAUSE
the computer will resume the program where you left off.
m Console Operation - "H R C" (Heart Rate Control}
***Please note: You must grip the heart rate sensor pods located on the
handlebars for the computer to read your pulse and for the Heart Rate
Control programs to work effectively.
23