I ENGLISH
I
Preparation
*:o Use SB-LSM80 or SB-LSM160 Battery Pack only.
°:o The Battery Pack may be charged a little at the time of purchase.
Charging
the Lithium
Ion Battery
Pack
1. Turn the [Power] switch to [Off].
2. Attach the Battery Pack to the DVD Camcorder.
3. Connect the AC Power Adapter to an AC Cord and connect the AC
Cord to a walt socket.
4. Open the LCD Screen and Jack Cover.
5. Connect the DC cable to the DC IN jack on the DVD Camcorder.
The charging indicator wilt start to blink, showing that the Battery is
charging.
6. When the Battery is fully charged, disconnect the Battery Pack and
the AC Power Adapter from the DVD Camcorder. Even with the
Power switched Off, the Battery Pack wilt still discharge.
Blinking
time
Charging rate
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
BNnking stops and stays on
90% ~ 100%
On for a second and off for a
Error - Reset the Battery Pack and
second
ihe DO Cable
f
<Charging indicator>