Disassemble The Flex Door - Samsung RF4289HA User Manual

u
Remove the 3 hex head bolts ( 7 ) attached to
the upper left and right door hinges with a socket
wrench (10mm).
Remove the ground screw ( 8 ) attached to the
upper left and right door hinges with a philips
screwdriver (+). Remove the upper left and right
door hinges ( 9 ).
Socket wrench
4. Lift the door straight up to remove.
u
Remove the screw ( 10 ) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts ( 11 ) attached to
the lower left and right door hinges with an allen
wrench (3/16"). Remove the lower left and right
door hinges ( 12 ).
o
o o o
REATTACHING THE REFRIGERATOR
DOORS
To reattach the fridge doors, assemble parts in reverse
order.
DISASSEMBLE THE FLEX DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2_
Take off the cover ( 2 ) w/harness with a flat-blade
screwdriver (-).
u
Disconnect the housing connector.
u
Remove 2 hex head bolts from sides with a socket
wrench (10mm).
5. Lift up the Flex door from the rails.
08 setting up