Getting Ready To Install The Refrigerator - Samsung RF4289HA User Manual

Sett r
r French Door FRefr gerator
GETTING READY TO INSTALL THE
REFRIGERATOR
Congratulations on your purchase of the Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
,, A location with easy access to the water supply.
,, A location without direct exposure to sunlight.
,, A location with a leveled floor.
,, A location with enough space for the refrigerator
doors to open easily.
,, Allow sufficient space to the right, left, back and
top for air circulation.
,, Plaease ensure that appliance can be moved freely
in the event of maintenance & service.
If the refrigerator does not have enough space, the
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra space
at the back for the water line connections.
When you install the refrigerator next to a fixed wall,
you need a minimum clearance of 3 sA" (95mm)
between the refrigerator and wall to allow the door to
swing open.
First thing! Make sure that you can easily move your
refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways,
etc.
The following chart details the exact height and depth
of this Samsung French Door Refrigerator.
Model Depth Width "B" Height Overall
"A .... C" Height "D"
68%"
291/2 '' 35 _" 69 _"
RF4289HA (749 mm) (912 mm) (1742 (1768 mm)
ram)
Depth "E"
361/_ ,,
(922 mm)
®
, Allow clearance to the _ ......
right, left, back and top /}
when installing. I
This will help reduce power
/
consumption and keep |
your energy bills lower.
Do not install the refrigerator _
where the temperature will go
below 50°F (10°C).
Do not locate the refrigerator where it may become
wet.
When moving your refrigerator
Z_ To prevent floor damage, be sure the front
CAUTION adjusting legs are in the up position (above
the floor).
Refer to 'Adjusting the doors' in the manual
(on page 9).
Flat-blade screw Control Lever
driver(-)
FLOORING
For proper installation, this refrigerator must be placed
on a leveled surface of hard material that is the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator,
or approximately 3591bs (165kg).
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When moving
a refrigerator, you need to pull and push it straight
forwards or back. Do not wiggle it from side to side.
06 setting up